| A ) |
WHEEL FLOW TRANSMITTER : This type
of flow Transmitter is used for flow measurement
of liquid, the viscosity of which is less than 1.5 C.P. |
| |
| RANGE : |
0 -- 10000 LPH . |
| ACCURACY : |
±1%
(between 10% to 100% FR). |
| RANGEABILITY: |
10 to 1. |
| OPERATING PRESSURE: |
10 Kg/cm2 (Max.) |
| OPERATING TEMP.: |
10 oC - 60 o C. |
| POWER SUPPLY: |
24 VDC@ 100mA. |
| OUTPUT: |
4 - 20mA dc, ( 3-wire system for 500 ohms load) |
| MOUNTING: |
Horizontal |
| FLOW CONDITION : |
Full pipe condition. |
| CONNECTIONS: |
Flanged, screwed, nozzle |
| FIELD CRITERIA : |
Attachment available to protect from direct
sunlight . |
|
| B) |
ELECTROMAGNETIC FLOWMETERS :
This is suitable for conductivity media of > 5mS/cm.
There is no moving part and needs no maintenance .
The measurement accuracy is ±0.5% F.S. It is
recommended for slurry and suspended particles .
There are two type of EM flow meter ,
1) Full Bore Type : Suitable for pipe size upto 2000 mm.
2) Insertion Type : Suitable for pipe size upto 8000 mm. |
| C) |
PD FLOWMETERS : This flowmeter is
used for different types of petroleum products. It can be
also used to measure the actual diesel consumption by
diesel gensets, engines or automobiles. It can be used
effectively in the following applications :
1) Oil Burners ( not Gas burner) .
2) Legal verification & testing facilities.
3) Fixed position motors .
4) On board ships. |
| D) |
D.P. TRANSMITTER : In is mainly used in
any process industry, sometimes as recording device.
Specification :
1) The DP Cell / transmitter is supplied complete
With 3 way / 5 way manifold valve.
2) A.R.O. output of 4-20 mA d.c.
3) Accuracy : ±0.35%
F.S.
4) Incorporates piezoresistive DP transmitters . |
| E) |
VORTEX FLOWMETER : It is mainly used
To measure gas, liquid or steam, media with suspended
Particles or corrosive in nature, cryogenic application etc.
Specification :
1) Pipe size : 25 to 3000 mm.
2) Accuracy : ±1%
F.S.
3) No maintenance required.
4) Capable to work under high pressure temperature. |
